Roman
|
Добавлено: 20-01-07 03:30 Заголовок сообщения: ITU G.992.5 Annex L (RE ADSL2+) для протяжённых линий |
|
|
Прочитал как у некоторых Annex M включается. У меня не заработал. Видимо зависит от ATC или от железа на ATC.
Но включился Annex L.
http://en.wikipedia.org/wiki/ITU_G.992.5_Annex_L
Цитата: | From Wikipedia, the free encyclopedia
This is an ITU (International Telecommunication Union) standard, also referred to as RE ADSL2+. This extends the capability of basic ADSL by doubling the number of downstream bits. The data rates can be as high as 24 Mbit/s downstream and 1 Mbit/s upstream depending on the distance from the DSLAM to the customer's home.
The main difference between this specification and ITU G.992.5 (ADSL2+) is the maximum distance that can be used. This increase in distance is made possible by using more power on the lower frequencies, enabling the link to work at a distance of 7 kilometers, or 23,000 ft. Although the standard development is completed and verified by the ITU, the owners of the local loop network don't allow this standard to be used because the high power can create audible cross-talk. |
Если коротко, то тут написано, что отличается от ITU G.992.5 (ADSL2+) большей максимальной дистанцией: 7км против 2.4км. Это достигается большей мощностью в низких частотах.
По показаниям модема улучшилось соотношение сигнал/шум на входящем потоке с 24дБ до 25дБ. И видно, что мощность передатчика DSLAM увеличилась с 7 до 10дБ.
Код: | Annex A
noise margin upstream: 11 db
output power downstream: 7 db
attenuation upstream: 8 db
noise margin downstream: 24 db
output power upstream: 11 db
attenuation downstream: 14 db
========
Annex AL
noise margin upstream: 11 db
output power downstream: 10 db
attenuation upstream: 8 db
noise margin downstream: 25 db
output power upstream: 11 db
attenuation downstream: 15 db |
Модем ZyXEL P660RU c последней прошивкой
http://zyxel.ru/content/support/download/product/288/firmware
Цитата: | 27.09.2006 340ALO0D0.zip
Микропрограмма версии 3.40(ALO.0)D0 для P-660RU (Annex A)
Новые возможности
Добавлена возможность работы с утилитой ZyXEL NetFriend
Добавлена функция привязки ATM-каналов к портам
Добавлен выбор режимов Annex M, Annex L
Добавлена поддержка Cone NAT
Добавлена настройка MTU в веб-интерфейсе и командной строке |
Скорость у меня в данный момент ограничена до 8М для надёжности соединения.
Код: | Upstream Speed: 835 kbps
Downstream Speed: 8064 kbps |
Надо будет попросить теперь повысить.
Вобщем у кого плохая линия попробуйте включить Annex L.
Для моего модема это делается командной строкой:
P660RU-T1> w ad openc readsl2
В ответ выдаёт: ANNEXAL
Пишите сюда о результатах.
Приведённые выше параметры линии снимаются командами:
w ad l f
w ad l n
Счетчики ошибок:
Код: | P660RU-T1> w ad pe
near-end FEC error fast: 0
near-end FEC error interleaved: 31
near-end CRC error fast: 0
near-end CRC error interleaved: 0
near-end HEC error fast: 0
near-end HEC error interleaved: 0
far-end FEC error fast: 0
far-end FEC error interleaved: 0
far-end CRC error fast: 0
far-end CRC error interleaved: 0
far-end HEC error fast: 0
far-end HEC error interleaved: 0
ADSL uptime 1:30:08 |
Если показания счётчика снятые подряд несколько раз сильно меняются в пределах от 0 то 65535, значит ошибки валят в таком количестве, что счётчик переполняется, т.е. переходит через 65535 на 0. Бывало и такое. |
|