Go to the first, previous, next, last section, table of contents.
The error code macros are defined in the header file `errno.h'.
All of them expand into integer constant values. Some of these error
codes can't occur on the GNU system, but they can occur using the GNU
library on other systems.
- Macro: int EPERM
Operation not permitted; only the owner of the file (or other resource)
or processes with special privileges can perform the operation.
- Macro: int ENOENT
No such file or directory. This is a "file doesn't exist" error
for ordinary files that are referenced in contexts where they are
expected to already exist.
- Macro: int ESRCH
No process matches the specified process ID.
- Macro: int EINTR
Interrupted function call; an asynchronous signal occurred and prevented
completion of the call. When this happens, you should try the call
You can choose to have functions resume after a signal that is handled,
rather than failing with
EINTR; see section Primitives Interrupted by Signals.
- Macro: int EIO
Input/output error; usually used for physical read or write errors.
- Macro: int ENXIO
No such device or address. The system tried to use the device
represented by a file you specified, and it couldn't find the device.
This can mean that the device file was installed incorrectly, or that
the physical device is missing or not correctly attached to the
- Macro: int E2BIG
Argument list too long; used when the arguments passed to a new program
being executed with one of the
exec functions (see section Executing a File) occupy too much memory space. This condition never arises in the
- Macro: int ENOEXEC
Invalid executable file format. This condition is detected by the
exec functions; see section Executing a File.
- Macro: int EBADF
Bad file descriptor; for example, I/O on a descriptor that has been
closed or reading from a descriptor open only for writing (or vice
- Macro: int ECHILD
There are no child processes. This error happens on operations that are
supposed to manipulate child processes, when there aren't any processes
- Macro: int EDEADLK
Deadlock avoided; allocating a system resource would have resulted in a
deadlock situation. The system does not guarantee that it will notice
all such situations. This error means you got lucky and the system
noticed; it might just hang. See section File Locks, for an example.
- Macro: int ENOMEM
No memory available. The system cannot allocate more virtual memory
because its capacity is full.
- Macro: int EACCES
Permission denied; the file permissions do not allow the attempted operation.
- Macro: int EFAULT
Bad address; an invalid pointer was detected.
In the GNU system, this error never happens; you get a signal instead.
- Macro: int ENOTBLK
A file that isn't a block special file was given in a situation that
requires one. For example, trying to mount an ordinary file as a file
system in Unix gives this error.
- Macro: int EBUSY
Resource busy; a system resource that can't be shared is already in use.
For example, if you try to delete a file that is the root of a currently
mounted filesystem, you get this error.
- Macro: int EEXIST
File exists; an existing file was specified in a context where it only
makes sense to specify a new file.
- Macro: int EXDEV
An attempt to make an improper link across file systems was detected.
This happens not only when you use
link (see section Hard Links) but
also when you rename a file with
rename (see section Renaming Files).
- Macro: int ENODEV
The wrong type of device was given to a function that expects a
particular sort of device.
- Macro: int ENOTDIR
A file that isn't a directory was specified when a directory is required.
- Macro: int EISDIR
File is a directory; you cannot open a directory for writing,
or create or remove hard links to it.
- Macro: int EINVAL
Invalid argument. This is used to indicate various kinds of problems
with passing the wrong argument to a library function.
- Macro: int EMFILE
The current process has too many files open and can't open any more.
Duplicate descriptors do count toward this limit.
In BSD and GNU, the number of open files is controlled by a resource
limit that can usually be increased. If you get this error, you might
want to increase the
RLIMIT_NOFILE limit or make it unlimited;
see section Limiting Resource Usage.
- Macro: int ENFILE
There are too many distinct file openings in the entire system. Note
that any number of linked channels count as just one file opening; see
section Linked Channels. This error never occurs in the GNU system.
- Macro: int ENOTTY
Inappropriate I/O control operation, such as trying to set terminal
modes on an ordinary file.
- Macro: int ETXTBSY
An attempt to execute a file that is currently open for writing, or
write to a file that is currently being executed. Often using a
debugger to run a program is considered having it open for writing and
will cause this error. (The name stands for "text file busy".) This
is not an error in the GNU system; the text is copied as necessary.
- Macro: int EFBIG
File too big; the size of a file would be larger than allowed by the system.
- Macro: int ENOSPC
No space left on device; write operation on a file failed because the
disk is full.
- Macro: int ESPIPE
Invalid seek operation (such as on a pipe).
- Macro: int EROFS
An attempt was made to modify something on a read-only file system.
- Macro: int EMLINK
Too many links; the link count of a single file would become too large.
rename can cause this error if the file being renamed already has
as many links as it can take (see section Renaming Files).
- Macro: int EPIPE
Broken pipe; there is no process reading from the other end of a pipe.
Every library function that returns this error code also generates a
SIGPIPE signal; this signal terminates the program if not handled
or blocked. Thus, your program will never actually see
unless it has handled or blocked
- Macro: int EDOM
Domain error; used by mathematical functions when an argument value does
not fall into the domain over which the function is defined.
- Macro: int ERANGE
Range error; used by mathematical functions when the result value is
not representable because of overflow or underflow.
- Macro: int EAGAIN
Resource temporarily unavailable; the call might work if you try again
later. The macro
EWOULDBLOCK is another name for
they are always the same in the GNU C library.
This error can happen in a few different situations:
An operation that would block was attempted on an object that has
non-blocking mode selected. Trying the same operation again will block
until some external condition makes it possible to read, write, or
connect (whatever the operation). You can use
select to find out
when the operation will be possible; see section Waiting for Input or Output.
Portability Note: In many older Unix systems, this condition
was indicated by
EWOULDBLOCK, which was a distinct error code
EAGAIN. To make your program portable, you should
check for both codes and treat them the same.
A temporary resource shortage made an operation impossible.
can return this error. It indicates that the shortage is expected to
pass, so your program can try the call again later and it may succeed.
It is probably a good idea to delay for a few seconds before trying it
again, to allow time for other processes to release scarce resources.
Such shortages are usually fairly serious and affect the whole system,
so usually an interactive program should report the error to the user
and return to its command loop.
- Macro: int EWOULDBLOCK
In the GNU C library, this is another name for
The values are always the same, on every operating system.
C libraries in many older Unix systems have
EWOULDBLOCK as a
separate error code.
- Macro: int EINPROGRESS
An operation that cannot complete immediately was initiated on an object
that has non-blocking mode selected. Some functions that must always
block (such as
connect; see section Making a Connection) never return
EAGAIN. Instead, they return
EINPROGRESS to indicate that
the operation has begun and will take some time. Attempts to manipulate
the object before the call completes return
EALREADY. You can
select function to find out when the pending operation
has completed; see section Waiting for Input or Output.
- Macro: int EALREADY
An operation is already in progress on an object that has non-blocking
- Macro: int ENOTSOCK
A file that isn't a socket was specified when a socket is required.
- Macro: int EMSGSIZE
The size of a message sent on a socket was larger than the supported
- Macro: int EPROTOTYPE
The socket type does not support the requested communications protocol.
- Macro: int ENOPROTOOPT
You specified a socket option that doesn't make sense for the
particular protocol being used by the socket. See section Socket Options.
- Macro: int EPROTONOSUPPORT
The socket domain does not support the requested communications protocol
(perhaps because the requested protocol is completely invalid.)
See section Creating a Socket.
- Macro: int ESOCKTNOSUPPORT
The socket type is not supported.
- Macro: int EOPNOTSUPP
The operation you requested is not supported. Some socket functions
don't make sense for all types of sockets, and others may not be
implemented for all communications protocols. In the GNU system, this
error can happen for many calls when the object does not support the
particular operation; it is a generic indication that the server knows
nothing to do for that call.
- Macro: int EPFNOSUPPORT
The socket communications protocol family you requested is not supported.
- Macro: int EAFNOSUPPORT
The address family specified for a socket is not supported; it is
inconsistent with the protocol being used on the socket. See section Sockets.
- Macro: int EADDRINUSE
The requested socket address is already in use. See section Socket Addresses.
- Macro: int EADDRNOTAVAIL
The requested socket address is not available; for example, you tried
to give a socket a name that doesn't match the local host name.
See section Socket Addresses.
- Macro: int ENETDOWN
A socket operation failed because the network was down.
- Macro: int ENETUNREACH
A socket operation failed because the subnet containing the remote host
- Macro: int ENETRESET
A network connection was reset because the remote host crashed.
- Macro: int ECONNABORTED
A network connection was aborted locally.
- Macro: int ECONNRESET
A network connection was closed for reasons outside the control of the
local host, such as by the remote machine rebooting or an unrecoverable
- Macro: int ENOBUFS
The kernel's buffers for I/O operations are all in use. In GNU, this
error is always synonymous with
ENOMEM; you may get one or the
other from network operations.
- Macro: int EISCONN
You tried to connect a socket that is already connected.
See section Making a Connection.
- Macro: int ENOTCONN
The socket is not connected to anything. You get this error when you
try to transmit data over a socket, without first specifying a
destination for the data. For a connectionless socket (for datagram
protocols, such as UDP), you get
- Macro: int EDESTADDRREQ
No default destination address was set for the socket. You get this
error when you try to transmit data over a connectionless socket,
without first specifying a destination for the data with
- Macro: int ESHUTDOWN
The socket has already been shut down.
- Macro: int ETOOMANYREFS
- Macro: int ETIMEDOUT
A socket operation with a specified timeout received no response during
the timeout period.
- Macro: int ECONNREFUSED
A remote host refused to allow the network connection (typically because
it is not running the requested service).
- Macro: int ELOOP
Too many levels of symbolic links were encountered in looking up a file name.
This often indicates a cycle of symbolic links.
- Macro: int ENAMETOOLONG
Filename too long (longer than
PATH_MAX; see section Limits on File System Capacity) or host name too long (in
sethostname; see section Host Identification).
- Macro: int EHOSTDOWN
The remote host for a requested network connection is down.
- Macro: int EHOSTUNREACH
The remote host for a requested network connection is not reachable.
- Macro: int ENOTEMPTY
Directory not empty, where an empty directory was expected. Typically,
this error occurs when you are trying to delete a directory.
- Macro: int EPROCLIM
This means that the per-user limit on new process would be exceeded by
fork. See section Limiting Resource Usage, for details on
- Macro: int EUSERS
The file quota system is confused because there are too many users.
- Macro: int EDQUOT
The user's disk quota was exceeded.
- Macro: int ESTALE
Stale NFS file handle. This indicates an internal confusion in the NFS
system which is due to file system rearrangements on the server host.
Repairing this condition usually requires unmounting and remounting
the NFS file system on the local host.
- Macro: int EREMOTE
An attempt was made to NFS-mount a remote file system with a file name that
already specifies an NFS-mounted file.
(This is an error on some operating systems, but we expect it to work
properly on the GNU system, making this error code impossible.)
- Macro: int EBADRPC
- Macro: int ERPCMISMATCH
- Macro: int EPROGUNAVAIL
- Macro: int EPROGMISMATCH
- Macro: int EPROCUNAVAIL
- Macro: int ENOLCK
No locks available. This is used by the file locking facilities; see
section File Locks. This error is never generated by the GNU system, but
it can result from an operation to an NFS server running another
- Macro: int EFTYPE
Inappropriate file type or format. The file was the wrong type for the
operation, or a data file had the wrong format.
On some systems
chmod returns this error if you try to set the
sticky bit on a non-directory file; see section Assigning File Permissions.
- Macro: int EAUTH
- Macro: int ENEEDAUTH
- Macro: int ENOSYS
Function not implemented. Some functions have commands or options defined
that might not be supported in all implementations, and this is the kind
of error you get if you request them and they are not supported.
- Macro: int EILSEQ
While decoding a multibyte character the function came along an invalid
or an incomplete sequence of bytes or the given wide character is invalid.
- Macro: int EBACKGROUND
In the GNU system, servers supporting the
term protocol return
this error for certain operations when the caller is not in the
foreground process group of the terminal. Users do not usually see this
error because functions such as
it into a
SIGTTOU signal. See section Job Control,
for information on process groups and these signals.
- Macro: int EDIED
In the GNU system, opening a file returns this error when the file is
translated by a program and the translator program dies while starting
up, before it has connected to the file.
- Macro: int ED
The experienced user will know what is wrong.
- Macro: int EGREGIOUS
You did what?
- Macro: int EIEIO
Go home and have a glass of warm, dairy-fresh milk.
- Macro: int EGRATUITOUS
This error code has no purpose.
- Macro: int EBADMSG
- Macro: int EIDRM
- Macro: int EMULTIHOP
- Macro: int ENODATA
- Macro: int ENOLINK
- Macro: int ENOMSG
- Macro: int ENOSR
- Macro: int ENOSTR
- Macro: int EOVERFLOW
- Macro: int EPROTO
- Macro: int ETIME
The following error codes are defined by the Linux/i386 kernel.
They are not yet documented.
- Macro: int ERESTART
- Macro: int ECHRNG
- Macro: int EL2NSYNC
- Macro: int EL3HLT
- Macro: int EL3RST
- Macro: int ELNRNG
- Macro: int EUNATCH
- Macro: int ENOCSI
- Macro: int EL2HLT
- Macro: int EBADE
- Macro: int EBADR
- Macro: int EXFULL
- Macro: int ENOANO
- Macro: int EBADRQC
- Macro: int EBADSLT
- Macro: int EDEADLOCK
- Macro: int EBFONT
- Macro: int ENONET
- Macro: int ENOPKG
- Macro: int EADV
- Macro: int ESRMNT
- Macro: int ECOMM
- Macro: int EDOTDOT
- Macro: int ENOTUNIQ
- Macro: int EBADFD
- Macro: int EREMCHG
- Macro: int ELIBACC
- Macro: int ELIBBAD
- Macro: int ELIBSCN
- Macro: int ELIBMAX
- Macro: int ELIBEXEC
- Macro: int ESTRPIPE
- Macro: int EUCLEAN
- Macro: int ENOTNAM
- Macro: int ENAVAIL
- Macro: int EISNAM
- Macro: int EREMOTEIO
- Macro: int ENOMEDIUM
- Macro: int EMEDIUMTYPE
Go to the first, previous, next, last section, table of contents.