• 26 — Creating Graphs with grap
• By Susan Peppard
• What is grap?
• The Basics
• Adding Bells, Whistles, and Ticks
• Adding Shapes and Other Features
• Summary of grap Commands
• Summary

26 — Creating Graphs with grap

By Susan Peppard

What is grap?

grap is a troff preprocessor that uses pic to construct different types of graphs. Its use in data analysis is limited. For example, you can use grap to determine whether a population is growing exponentially. grap, then, is used primarily to include graphs in troff documents. Like the other troff preprocessors, it is fussy about syntax. You can't simply sit down and toss off three or four complicated graphs. You have to read the documentation. grap, like pic, faces stiff competition from the PC-based packages.

NOTE: grap does not provide color or shading.

The Basics

One of the more endearing qualities of UNIX is its inconsistency. You would expect the grap macros to be .GS and .GE, and you would be wrong. The grap macros are .G1 and .G2. In addition to these macros, all that grap requires for a primitive graph is some data. Take, for example, the grades on a test:

.G1

75

78

81

52

63

61

70

71

84

58

.G2

These dismal grades, after sorting, produce a scatter point graph.

Because grap has a copy facility similar to that of pic, you can simplify your code even more by putting the data in a separate file. (See Chapter 25.) For example,

.G1

copy "test.scores"

.G2

If you want the graph to have a solid line instead of scatter points, simply add a line of code that says draw solid immediately after the .G1 macro.

Adding Bells, Whistles, and Ticks

You can make your graph much more attractive by drawing a frame, adding labels, and specifying ticks. The following code, for example, produces a more sophisticated graph.

frame invis ht 2 wid 3 left solid bot solid

label left "1990" "Dollars" left .5

label bot "Grand Total:  $210,000"

ticks left out at 6000 "6,000", 9000 "9,000", 12000 "12,000", 15000 "15,000",\

18000 "18,000", 21000 "21,000"

ticks bot at 1990 "1990", 1995 "1995", 2000 "2000", 2005 "2005", \

2010 "2010"

draw solid

copy "cost.child"

.G2

Here, the frame is shown only on the bottom and left side. The x and y coordinates have labels. Also, the ticks have been specified explicitly; they are not determined by grap.

TIP: You can save yourself hours of debugging if you remember that grap doesn't understand commas in large numbers. The ticks left line above specifies 9000 "9,000". The commas are safely isolated in labels specified in quotation marks. The grap specifications themselves contain no commas.

The data file—in this case, cost.child—also must contain no commas.

NOTE: Earlier versions of grap may not recognize the abbreviation bot for bottom.

You can specify ticks as out. This means that the ticks themselves, but not their labels, appear outside the grap frame. You can also specify ticks as in, in which case they appear inside the frame.

If there are too many dates to fit across the bottom of a graph, you might want to use apostrophes in the labels, as in '10, '20, and '30. To do this, you must tell grap that your label is a literal. (This is what C programmers have to do all the time.) If you want to specify the first and last dates in full, you need to use two tick lines. The following code, for example, produces bottom labels of 1900, '05, '10, '15, and so on, up to 1950:

ticks bottom out at 0 "1900", 50 "1950"

ticks bottom out from 05 to 45 by 5 "'%g"

NOTE: To suppress tick labels, use a null argument ("").

Notice the words at 0 in the previous example. grap recognizes x,y coordinates, and unlike pic, it understands that 0,0 is the intersection of the x and y axes. To use coordinates, you use the coord command, as in

coord x first-value, y last-value

Without the coord command, grap automatically pads your first and last values, giving you blank space at the beginning and at the end of your graph. coord suppresses padding.

Likewise, use coord if you want an exponential graph rather than a linear graph.

You can plot the figures for low-income and high-income families on the graph shown in Figure 26.1.

Figure 26.1. The cost of raising a child, by income level.

The following code produced Figure 26.1.

.G1

frame invis ht 2 wid 3 left solid bottom solid

label left "1990" " Dollars" left .4

"High" ljust at 2008,27000

"Middle" ljust at 2008,20000

"Low" ljust at 2008,14000

ticks left out at 3000 "3,000", 6000 "6,000",\

9000 "9,000", 12000 "12,000", 15000 "15,000",\

18000 "18,000", 21000 "21,000", 24000 "24,000",\27000 "27,000", 30000 "30,000"

ticks bottom at 1990 "1990", 1995 "1995", 2000 "2000", 2005 "2005", 2010 "2010"

copy "cost2.child"

draw dotted

copy "cost.child"

new solid

copy "cost3.child"

new dashed

.G2

The data file is formatted like this:

1990     4330

1991     4590

1992     4870

1993     5510

1994     5850

1995     6200

1996     6550

1997     6859

1998     7360

1999     7570

2000     8020

2001     8500

2002     10360

2003     10980

2004     11640

2005     13160

2006     13950

2007     14780

NOTE: grap doesn't care whether you separate data columns with a space or a tab so long as you're consistent.

Adding Shapes and Other Features

grap does more than just draw lines. It can print a grid. It can draw a circle, ellipse, or arrow. In fact, grap can draw just about anything that pic can.

grap has a macro facility just like that of pic:

define name X commands X

For the delimiter, you can use any character that isn't in the command text. You can also use braces. grap permits up to nine arguments, just as pic does.

In addition to data explicitly specified in a file, grap works with functions that more or less describe the data. The following code, for example, produces a sine curve:

frame ht 1 wid 3

draw solid

pi=atan2(0,-1)

for i from 0 to 2*pi by .1 do { next at i, sin(i) }

Summary of grap Commands

Table 26.1 summarizes the grap commands. Square brackets indicate that an argument is optional. A pipe between arguments means that you must use only one of the arguments.

Table 26.1. Summary of grap commands.

Command

Syntax

Description

In addition to the commands listed in Table 26.1, grap provides for predefined strings and built-in functions.

Predefined strings include bullet, plus, box, star, dot, times, htick, vtick, square, and delta.

Built-in functions include log (base 10), exp (base 10), int, sin, cos, atan2, sqrt, min, max, and rand.

Summary

grap gives you a quick and relatively easy way of inserting graphs into memos or other text files. It can produce line and bar graphs, but no pie charts, no color, and no shading. Nevertheless, grap can be a useful tool. Like pic, grap is system-sensitive, so allow time for debugging.