IPv6 Supports

Zebra fully supports IPv6 routing. As described so far, Zebra supports RIPng, OSPFv3 and BGP-4+. You can give IPv6 addresses to an interface and configure static IPv6 routing information. Zebra-IPv6 also provides automatic address configuration via a feature called address autoconfiguration. To do it, the router must send router advertisement messages to the all nodes that exist on the network.

Menu

Router Advertisement

Menu
Router Advertisement

Router Advertisement

Interface Command: ipv6 nd send-ra

Interface Command: ipv6 nd prefix-advertisement IPV6PREFIX

     interface eth0
      ipv6 nd send-ra
      ipv6 nd prefix-advertisement 3ffe:506:5009::/64

This file documents the GNU Zebra software which manages common TCP/IP routing protocols.

This is Edition 0.1, last updated 5 July 2000 of `The GNU Zebra Manual', for Zebra Version 0.88.

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by Kunihiro Ishiguro.